Laying Up - Ashore

With awful weather predicted for Monday I went to the boat on Sunday afternoon to do some work before the haul out on Wednesday, that worked out well as I got some useful odds and ends done on Sunday, then on Monday I installed a new water tank - the water was starting to smell, even with purification tabs, sterilisation back in March and a filter. 

I had also decided that the boat was trimmed too far down in the stern due to:

• Moving the water tank with 40 - 50 Kilos of water aft when I replaced the fuel tank.
• The larger steel fuel tank replacing a bladder plus a couple of cans of spare, put 100 Litres of fuel totalling c 120 Kg, with tank, a long way aft.
• Carrying the dingy on the roof rather than forward.
• Stowing my too long heavy ropes (80m of 14mm & 100 or 12mm) in the quarter berth.

So using the original deck fitting the bladder tank is back in the forepeak with the on-demand electric pump under a saloon berth which frees up a little room in the under sink locker. The ropes are also now in the forepeak leaving more room for the heavy weather and storm jibs in the quarter berth and giving better access to all. They can easily be moved back if necessary.

Tuesday saw a lot of odd jobs done and Sancerre was hauled out at 09:00 on Wednesday, with essentially no wind it was very straightforward unlike last year when I had >20 knots of wind blowing me into the hoist requiring the engine to be running astern for at least the last hundred yards which makes steering tricky with the prop walk.

 

On Tuesday it was me queuing behind the previous

boat to be lifted.

I was very pleased with the state of the hull, the change of location and anti-foul has made a big difference, she looks dirty but it was mainly slime with no weed or Barnacles on the main part of the hull. There was a good crop of Barnacles and small limpets in a couple of places where there was little or no anti-foul such as on the shaft where a anode had come off, the underneath of the keel and rudder and on the rope cutter. The prop was also good and was cleaned of growth from the last few months with a gentle wipe with a cloth and the "Pellerclean" has been on since July 2023. 

The clean spots are where the sling slipped
forward before being stopped by the safety lines.
This is a common issue with boats like the A9m,
Contessa 32, etc. with a sloping profile from
the forefoot to keel. It can be an expensive mistake
to omit the safety rope! Make sure the operators
knows it is required.

This may look dirty but it is nothing compared to previous years.
The bag over the propeller is to protect the "Pellerclean" anti-
foul coating from errant sprays from the power washer.

Mullet have been grazing on the rudder. The port side is dirtier
than the starboard side due to the right handed propeller and
being moored starboard side too keeping the sun off that side.

It cleaned up very well (pics if I remember next time down) and the question now is 2 or 3 coats of anti-foul? At £109.95 per 2.5 litres (RRP £157.68) one does not want to be profligate with it! Nor do I want to built up a thick coat of anti-foul which at some point might then need striping. 

The next visit will hopefully include re-marking the anchor chain and removing the last link that is a bit rusty due to contact with the stainless anchor swivel, prep work for anti-foul, cleaning the top sides, refitting the anchor locker cover removed for painting, refitting the removable parts of the Blakes sea cocks after cleaning, some anti-fouling and more. Work is never ending on a boat!